If your bed frame does not match a standard mattress size, a custom mattress is the answer, and in the UAE it is far easier to order one than most people assume. You measure your bed frame, share the dimensions, choose the mattress type and firmness you want, and it gets built to fit. That is the whole process. Standard sizes work for most people, but plenty of beds in this region do not follow standard measurements, whether it is an imported frame, a built-in platform, a bunk bed, a majlis seating area, or a caravan.
Why Standard Sizes Do Not Always Fit
Mattress sizes in the UAE mostly follow international standards, but the beds people own do not always co-operate. Frames get imported from Europe, the US, and Asia, and each region measures slightly differently. A king from one country is not always the same as a king from another. So you end up with a frame that leaves a gap on one side, or a mattress that sits too tight and bunches at the corners.
There are also beds that were never meant to take a standard mattress in the first place. Built-in bedroom platforms, common in a lot of newer apartments and villas here, are often sized to the room rather than to a mattress chart. Bunk beds, sofa beds, daybeds, and majlis floor seating all fall outside the usual measurements too. The same goes for caravans, boats, and campervans, where space is tight and every centimetre counts.
A poor fit is more than cosmetic. A mattress that is too small may shift within the frame and leave gaps, while one that is too large may buckle or compress at the edges, potentially accelerating wear.
Standard Mattress Sizes in the UAE for Reference
Before going custom, it helps to know the standard sizes, because sometimes the closest standard size genuinely is the right call. Here are the common measurements you will find across the UAE.
- Single: 90 x 190 cm and 100 x 200 cm, suited to children, teenagers, and single sleepers.
- Twin: 120 x 200 cm, good for one adult who wants a bit more room.
- Double: 140 x 200 cm, works for a single sleeper who likes space or a couple who prefer a compact bed.
- Queen: 150 x 200 cm and 160 x 200 cm, one of the most popular sizes for couples.
- King: 180 x 200 cm, ideal for couples who want more room to move.
- Super King: 200 x 200 cm, the largest standard option, built for maximum sleeping space.
Sizes can vary slightly between brands, so these are guidelines rather than fixed numbers. If your bed frame falls within a centimetre or two of one of these, a standard mattress will usually do the job. If it is further out than that, or an unusual shape, custom sizing is the better route.
When You Actually Need a Custom Mattress
It is worth being honest about this, because not every situation calls for one. You need a custom size when the gap between your frame and the nearest standard size is large enough to affect comfort or fit. Here are the situations that come up most often.
Your bed frame is an unusual size. This is especially common with imported bed frames, particularly those from the United States, where mattress dimensions are measured in inches and then converted to centimetres. As a result, you may end up with measurements that do not match standard UAE mattress sizes exactly. If your bed frame has unique dimensions that fall outside standard sizing, a custom mattress can be made to fit it precisely, ensuring proper support, comfort, and a clean fit within the frame.
You have a built-in or platform bed. When the bed is part of the room's construction, the mattress has to be built to the recess, not the other way around. This is one of the most common reasons people order a custom size mattress in the UAE.
The space is tight or unusually shaped. Caravans, yachts, attic rooms with sloped ceilings, and bay-window nooks often require customised dimensions to make the most of the available space.
You want a non-standard thickness. Sometimes the length and width are fine but the height is the issue. A deep bed frame might need a thicker mattress, while a low platform or a top bunk needs a slimmer one for safety. Adjusting thickness is a form of custom sizing too.
How Custom Mattress Sizing Works
The process is simpler than people expect, and good custom mattress makers will walk you through it. Here is how it works with Easeliving from start to finish.
1. Measure Your Bed Frame Correctly
Measure the inside of the frame, edge to edge, not the old mattress. Old mattresses shrink and compress over time, so measuring them gives you the wrong number. Record the internal length and width, and if your frame has a depth limit, note the maximum thickness it can take. Measure in centimetres and double-check, since a small error here carries through to the finished product.
2. Choose Your Mattress Type and Firmness
This is where you decide how the mattress should feel, not just how it should fit. The same custom dimensions can be built as an innerspring, a pocket spring hybrid, or a foam mattress, and the firmness is matched to how you sleep. Side sleepers tend to prefer softer surfaces, back and stomach sleepers usually do better on something firmer, and combination sleepers sit in the middle. Thickness changes how a mattress feels and supports you, so the team will recommend a height that suits your frame and sleep position.
3. Share Your Measurements and Confirm
Send your dimensions over, confirm the type, firmness, and thickness, and the order is set. Because every custom size memory foam mattress and spring mattress is built to your numbers, it helps to get them right the first time, as custom orders are made specifically for you.
4. Manufacturing and Delivery
The mattress is then manufactured locally and delivered to your door within 1 to 3 days across the UAE. Building everything in the UAE is part of what makes custom sizing practical here, because the production happens close to the customer rather than being shipped in from abroad.
Easeliving Mattresses Available in Custom Sizes
Most Easeliving mattresses can be built to custom dimensions, so you are not limited to a single model when you go bespoke.
Recommended for Back Support · Firm Innerspring
Ortho Euro Top Mattress | Medium Firm Innerspring Mattress
Firmness: Medium Firm
Ideal sleeper: All Positions / Spine Alignment
Warranty: 5 Year Warranty
Built on a Bonnell spring system that gives firm, consistent support across the whole surface, with a euro top layer that adds just enough cushioning to soften the feel without giving up the support underneath. This is a strong choice if you sleep on your back, wake up with lower back stiffness, or want a surface that holds its shape over the years rather than dipping in the middle. The breathable construction keeps airflow moving through the mattress, which matters in a climate where heat is already working against your sleep. Available in 20cm, 22cm, and 26cm heights, and it can be built to custom dimensions if your bed frame needs it.
Editor's Pick · Cooling Hybrid
Pocket Cool Gel Memory Foam Mattress | Plush Hybrid Euro Top with Cooling Gel
Firmness: Medium Firm
Ideal sleeper: All Positions / Hot Sleepers
Warranty: 10 Year Warranty
Ideal for hot sleepers in the UAE, this 30cm mattress combines a gel-infused euro top with individually wrapped pocket springs for cooling comfort, pressure relief and spinal support. It contours to your body, minimises motion transfer and suits all sleep positions. With customisable dimensions, a 10-year warranty and a 15-day trial, it offers comfort without stretching your budget.
Popular Choice · Plush Pocket Spring
Pillow-Top Pocket Spring Mattress | Plush Comfort and Medium Firm Support
Firmness: Medium Firm
Ideal sleeper: All Positions / Couples
Warranty: 7 Year Warranty
If you want a softer, more cushioned surface without compromising support, a pillow-top mattress is a good middle ground. It features individually wrapped pocket springs that respond independently to different parts of the body, along with an extra pillow-top layer stitched onto the surface for added plushness. The pocket springs provide targeted support to heavier areas of the body and allow air to circulate through the core, while the pillow top adds a softer, more comfortable feel. It is ideal for couples and those who want comfort without sinking too deeply into the mattress. Like the other options, it can also be made to your exact measurements.
Choosing a Custom Mattress in the UAE: What to Keep in Mind
A few things are specific to ordering here, and they are worth factoring in before you commit.
Get your measurements right the first time. Custom orders are built to your numbers, so accuracy matters more than it does with a standard size you can exchange. Measure twice, write it down, and confirm before the order goes ahead.
Think about the climate. Heat is a constant factor in the UAE, so choosing a mattress with breathable materials can help improve overall sleep comfort. Easeliving mattresses are designed with breathable fabrics that promote airflow throughout the night, helping create a cooler sleeping environment. For those who tend to sleep warm, gel foam can provide an additional cooling layer by helping regulate surface temperature and reduce heat build-up.
Buy from a local maker. Ordering a custom made mattress from a manufacturer based in the UAE means faster turnaround, easier communication, and support you can actually reach if something needs adjusting. It also means the mattress is built for the conditions here rather than adapted from a design made for a cooler climate.
FAQs About Custom Mattress Size UAE
Can I order a mattress in a custom size in the UAE?
Easeliving builds mattresses to custom dimensions across the UAE. You measure your bed frame, share the length, width, and any thickness limit, choose your mattress type and firmness, and it gets manufactured to fit. This is a practical option for imported frames, built-in beds, caravans, and any bed that falls outside standard sizing.
How do I measure my bed for a custom mattress?
Measure the inside of the bed frame from edge to edge, not your old mattress, since old mattresses shrink and give inaccurate readings. Record the internal length and width in centimetres, and note the maximum thickness your frame can take if it has a depth limit. Double-check the numbers before ordering, as custom mattresses are built specifically to your measurements.
Is a custom mattress more expensive than a standard one?
Not necessarily. Easeliving does not charge an additional fee simply because a mattress is made in a custom size. Pricing is based on the total surface area of the mattress (cm²), so the cost varies according to the dimensions you choose.
Can foam mattresses be made in custom sizes?
Yes. A custom foam mattress is one of the most flexible options because foam can be cut and tuned to a specific firmness. A custom size foam mattress works well for platform beds and tight spaces where a spring mattress is harder to fit.
How long does a custom mattress take to make and deliver?
Easeliving offers free delivery within the main city limits across the UAE. Delivery takes 1–3 working days for Dubai, Sharjah, Ajman, Umm Al Quwain and Ras Al Khaimah, and 3–7 working days for Abu Dhabi and Fujairah. A delivery charge of AED 100 applies to remote areas or locations outside city limits, as well as orders below AED 300.
Ready to Order Your Custom Mattress?
A bed that does not fit properly is not something you have to live with. If your frame sits outside standard sizes, a custom mattress built to your exact measurements solves the fit, the comfort, and the longevity all at once. Every Easeliving mattress is designed and manufactured in the UAE, built for the heat, the dust, and the way people here actually sleep, and most can be made to your dimensions with free delivery across the UAE.
